suzuki

With a change of plans I started looking into the specs of the 1.3l, 1.6l 8V, and the 1.6l 16V. Each engine increases in HP and torque, but I have also heard the 8V has more bottom end torque than the 16V, and everyone knows how hard a 1.3l can be beat on before dying. However, I had to pull a...

Hey all, recently picked up a '03 XL-7 and looking to build a Overlanding style rig out of it, but on a budget. Looking to do a 3" suspension lift and 2" body lift. I have the coil spacers and body lift already, so what coils could I run that would give me around 1" of lift? Also, what longer...

Am I going to have an issue using track/ring and pinion gears with a Samurai air locker in a samurai third? I know I’ve done it in the past with lunchbox lockers and the pin cans. I’m mainly wondering if I’ll need the pin can and side adjuster spacer with a full case air locker or if they...

Suzuki Samurai with 22r Toyota motor, Toyota 5 speed transmission, and Toyota doubler transfer case. Toyota axles front and rear. Air shocks all corners, new prp 5 point harnesses, corbeau seats, comes with 2 tanks, 36" iroks on beadlocks, 4:10 gears, rock lights, 4 link front and rear. Great...

Anyone running the roadless gear Pentadapters? I gave my cousin a first gen Toyota double cardan front driveshaft for the rear of his samurai. Sent him the link to the roadless gear parts. He’s telling me it won’t work and the register on the pentadapter is .039” too large to fit the samurai...

Man, do I hate chasing electrical problems. 1994 Tracker (1.6L m/t) has been having intermittent no-start issues, and I've been push-starting it when I need to use it (which is not very much). It will start, then it won't. I changed out the starter, new battery, checked alternator (ok), and...

Seems like an easy bit of info to find but my sorry a#s can't find it. So maybe someone here can help me please. I have a 1995 geo tracker. Does anyone know the wall thickness of the rear axle housing tubes? Thanks in advance!

This build has been a long time coming. I first had this rig in my possession back in 2007 when a friend of mine bought it sight unseen from seabass44 (12 volt guy) off of pbb. He wasn’t able to pick it up so another buddy and I drove up to Oriville to get it and hold it for him until he could...

So i picked up a rhd jimny with a bad motor for $1700 and traded one of my woods beater samurais for a tdi swapped project. It just so happens i have a built ford 9” and passenger drop dana 44… Anyways ill let the pics do the talking…

I have had some people here request some pictures of my old 87 Samurai, and I figured this was the best place to post them. Specs on the Sami before it was scrapped was 1.6 16v w56, Toyota doubler with 23 spline 4.7 gears in the rear case, Toyota axles with high pinion front diff and 5.29s with...

Is there a build thread for this out there somewhere? Came across it on IG and it’s for sale… I love small budget buggies

Posted on another Zuk forum but this place seems like it gets more traffic. I’m looking for some help with a measurement from a Samurai. I am building a small off road trailer. I am using OME rear Samurai springs part CSO38R and factory Suzuki shackles and bushings. Could someone please...

No paperwork Seemed to run fine ish a couple years ago when I parked it. Probably needs to be fully gone through. Im confident a splash of gas down the webber carb and some jumper cables should get it on a trailer. $1650 in prunedale ca Trade for gold, silver, 2a, ktm50, car trailer, order...

So I came across where they are installing a Toyota Prius :barf: electric power steering system into a Samurai. Has anyone on here done this and if so, how’s it holding up to off roading applications?

Haven't done a build thread in awhile, this will be a pretty lame one:grinpimp: After building a $$$$ diesel landcruiser and never wheeling it I decided to sell it to pay off some debt and build a cheaper 4x4. At least it will be a cheap shitbox sitting around not getting used instead of an...

I have a plan of stuffing my 2000 tracker 2.0 with automatic transmission into my 88.5 samurai body/chassis. I’ve searched YouTube, here and web and haven’t found anything about doing it. My concern is transmission tunnel interference with the larger transmission into the samurai body/chassis...

I don’t see a thread on this searching but I suck at that I guess. So, I plan on doing a 4 link suspension on my samurai front and rear using Dana 44 front and 9” rear differentials. I know the springs need to be narrow or skinny from what I see out there. What is out there that works really...

Didn't want to spam up FleshEater's thread anymore, but here's another favorite barebones zuki buggy. based off sidekick I think

I bought a 2000 Tracker for parts for my 88 Samurai and my 99 Tracker. The engine is a 2.0 and needs to be gone through. I knew the engine was needing help when I bought it. I’m trying to see how bad it is testing it but I can’t get the starter to turn over. Not sure what’s going on with it but...

I’m selling my game changer adapter and a 4 speed automatic with stock shifter to go with it. Everything works good I just ended up swapping in a v6 and don’t need it anymore. $800obo